Honda GCV170 and GCV200 oil capacity, spark plug and specs

Reviewed 1 primary sourceSee sources

Values below are from Honda’s GCV170 · GCV200 owner’s manual. Honda’s engine site did not list this manual by serial range when we checked, so compare it with the manual that came with your machine.

Maintenance specs

HondaGCV170GCV200
Displacement[1]166 cm³ (10.1 cu in)201 cm³ (12.3 cu in)
Oil capacity[1]Refill amount at an oil change is 12.0–13.5 oz (0.35–0.40 L). The manual gives no separate dry-engine figure.13.5 oz (0.40 L)13.5 oz (0.40 L)
Oil filter[1]None listedNone listed
Spark plug (mowers and other uses)[1]Honda lists NGK BPR6ES for pressure washer versions.NGK BPR5ESNGK BPR5ES
Spark plug gap[1]The manual gives the inch range as 0.028–0.030 in in the spark plug section and 0.028–0.031 in in the specifications.0.70–0.80 mm0.70–0.80 mm
Fuel tank[1]0.24 US gal (0.91 L)Not stated separately

Equipment: Overhead-valve vertical-shaft engines used on walk-behind mowers and pressure washers.

Oil grade

Fuel

Air filter

Honda recommends a Honda Genuine air filter; the manual gives no part number.[1]

Which engines this covers

Not stated in these sources

Sources

Facts on this page are restated from the documents below and linked to the publisher. Check the document for your exact model before relying on a value.

  1. Owner’s manual GCV170 · GCV200American Honda Motor Co. · 00X37Z9V 0004 · English section: fuel p. 9, oil and maintenance p. 10, problems p. 12, specifications and emissions symptoms p. 13 · retrieved

Primary publishers: American Honda Motor Co.. Spotted an error? Email the address in the footer with the model and the document you are using.