Honda GCV160 and GCV190 oil capacity, spark plug and specs

Reviewed 2 primary sourcesSee sources

Values below are from the current GCV160 · GCV190 owner’s manual. Honda publishes earlier manuals for older serial ranges, so check your serial number first.

Maintenance specs

HondaGCV160GCV190
Displacement[1]160 cm³ (9.8 cu in)187 cm³ (11.4 cu in)
Oil capacity, dry engine[1]17 oz (0.50 L)17 oz (0.50 L)
Oil refill amount[1]The manual prints the metric refill as 0.35–0.40 L in the oil change section and 0.35–0.41 L in the specifications. It says the actual amount varies with oil left in the engine, so always finish with the dipstick.12.0–13.5 oz12.0–13.5 oz
Oil filter[1]None listedNone listed
Spark plug (mowers and other uses)[1]Honda lists NGK BPR6ES for pressure washer versions.NGK BPR5ESNGK BPR5ES
Spark plug gap[1]0.028–0.030 in (0.70–0.80 mm)0.028–0.030 in (0.70–0.80 mm)
Air filter[1]The manual gives no part number.Paper elementPaper element
Fuel tank[1]0.25 US gal (0.93 L)0.25 US gal (0.93 L)

Equipment: Vertical-shaft engines used on walk-behind mowers and pressure washers.

Oil grade

Fuel

Which engines this covers

Not stated in these sources

Sources

Facts on this page are restated from the documents below and linked to the publisher. Check the document for your exact model before relying on a value.

  1. Owner’s manual GCV160 · GCV190American Honda Motor Co. · 00X37Z8B 0029 · English section: safety pp. 5–7, fuel and oil p. 7, maintenance p. 8, problems pp. 9–10, specifications pp. 10–11 · retrieved
  2. GC vertical engines (manuals by serial range)American Honda Motor Co. · Owner’s manual list by model and serial range · retrieved

Primary publishers: American Honda Motor Co.. Spotted an error? Email the address in the footer with the model and the document you are using.